 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VNQ860-E VNQ860SP-E QUAD CHANNEL HIGH SIDE DRIVER General Features Type VNQ860-E VNQ860SP-E RDS(ON)(1) 270m Iout 0.25A VCC 36V SO- 20 PowerSO-10TM Note: 1 Per each channel. CMOS COMPATIBLE I/Os UNDERVOLTAGE & OVERVOLTAGE Description The VNQ860-E, VNQ860SP-E are monolithic devices made using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind load with one side connected to ground. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. Device automatically turns OFF in case of ground pin disconnection. This device is especially suitable for industrial applications in norms conformity with IEC 61131, (Programmable Controllers International Standard). __-SHUT-DOWN SHORTED LOAD PROTECTION THERMAL SHUT-DOWN VERY LOW STAND-BY CURRENT PROTECTION AGAINST LOSS OF GROUND Block Diagram Order Codes Package SO-20 PowerSO-10TM Tube VNQ860 VNQ860SP Tape and Reel VNQ86013TR-E VNQ860SP13TR-E Rev 2 1/15 www.st.com 15 November 2005 VNQ860-E / VNQ860SP-E Table 1. Symbol VCC -VCC -IGND IOUT -IOUT IIN VIN ISTAT VESD Ptot TJ Tc Tstg DC supply voltage Reverse DC supply voltage DC reverse ground pin DC output current Reverse DC output current DC Input current Input voltage range DC Status voltage Electrostatic discharge (R = 1.5KW; C = 100pF) Power dissipation at Tc <= 25C Junction operating temperature Case operating temperature Storage Temperature 16 -40 to 150 -55 to 150 Absolute Maximum Rating Value Parameter SO-20 PowerSO-10 41 -0.3 -200 Internally limited -2 10 -3/+V CC + VCC 2000 90 Internally limited V V mA A A mA V V V W C C C Unit Figure 1. Configuration Diagram(Top View) & Suggested Connections for Unused and N.C. Pins Connection / pin Floating To Ground Status X N.C. X X Output X Input X Through 10K resistor 2/15 VNQ860-E / VNQ860SP-E Figure 2. Current and Voltage Conventions Table 2. Symbol Rthj-pin RthJA RthJC Thermal data Max Value Parameter SO-20 Thermal resistance junction-pins Thermal resistance junction-ambient Thermal resistance junction-case Max Max Max 8 58 PowerSO-10 52 Note 1 37 Note 2 1.4 C/W C/W C/W Unit 1.When mounted on FR4 printed circuit board with 0.5cm2 of copper area ( at least 35 thick ) connected to all VCC pins. 2.When mounted on FR4 printed circuit board with 6cm2 of copper area ( at least 35 thick ) connected to all VCC pins. 3/15 VNQ860-E / VNQ860SP-E Electrical Characteristics (8V < VCC < 36V; -40C < TJ < 150C; unless otherwise specified) Table 3. Symbol VCC VUSD VOV RON IS ILGND IL(OFF) IOUTleak IOUTleak Power Section Parameter Operating supply voltage Undervoltage shut-down Overvoltage shut-down On state resistance (per channel) Supply current Output current IOUT = 0.25A; TJ = 25C; IOUT = 0.25A; OFF state; VCC = 24V; TC = 25C ON state ( all channels ON ) VCC - V STAT = V IN = VGND = 24V; VOUT = 0V 0 VIN = VGND = 0V; VCC = VOUT = 24V; Tamb = 25C VIN = VGND = 0V; VCC = 24V; VOUT = 10V; Tamb = 25C 70 5 Test Conditions Min. 5.5 3 36 4 42 Typ. Max. 36 5.5 48 270 540 120 10 1 10 240 100 Unit V V V m mA mA OFF state output current VIN = VOUT = 0V OFF state output leakage current OFF state output leakage current Table 4. Symbol t(ON) Switching ( VCC = 24V) Parameter Turn-on delay time of Output current Turn-off delay time of Output current Test Conditions RL = 96 from VIN rising edge to VOUT = 2.4V RL = 96 from VIN rising edge to VOUT = 21.6V RL = 96 from VOUT = 2.4V to 19.2V RL = 96 from VOUT = 21.6V to 2.4V Min. Typ. 10 Max. Unit s s V/s V/s t(OFF) 40 0.75 0.25 (dVOUT/dt)on Turn-on voltage slope (dVOUT/dt)off Turn-off voltage slope Table 5. Symbol Ilim T(hyst) TTSD TR Vdemag Protections ( Per channel ) Parameter Current limitation Thermal hysteresis Thermal shut-down temperature Reset temperature Turn-off output clamp voltage IOUT = 0.25A, VCC = 24V Test Conditions Min. 0.35 7 150 135 VCC-59 VCC-52 VCC-47 Typ. 0.7 15 175 200 Max. 1.1 Unit A C C C V 4/15 VNQ860-E / VNQ860SP-E Table 6. Symbol VIL IIL VIH IIH VI(HYST) IIN VOL Logical Input ( Per channel ) Parameter Low level input voltage Low level input current High level input voltage . High level input current. Input hysteresis voltage Input current I/O Output votage VIN = VCC = 36V IIN = 5mA ( Fault condition ) VIN = 3.25V 0.5 200 1 VIN = 1.25V 1 3.25 10 Test Conditions Min. Typ. Max. 1.25 Unit V V V V Table 7. Symbol VSTAT ILSTAT CSTAT Status Pin Parameter Status low output voltage Status leakage current Test Conditions ISTAT = 5mA ( Fault condition ) Normal operation; VSTAT = V CC = 36V Min. Typ. Max. 1 10 100 Unit V pF Status pin input capacitance Normal operation; VSTAT = 5V Table 8. Symbol VF VCC - Output Diode Parameter Forwardon Voltage Test Conditions -IOUT = 0.3A; T J = 150C Min. Typ. Max. 1 Unit V Table 9. Truth Table MCOUTn L H L H L H L H L H I/On L H L H L Driven low L H L H OUTPUTn L H L X L L L L L L STATUS H H H H X X X X H H Conditions Normal operation Current limitation Overtemperature Undervoltage Overvoltage 5/15 VNQ860-E / VNQ860SP-E Figure 3. Switching Characteristics Figure 4. Typical Application Schematic 6/15 VNQ860-E / VNQ860SP-E Figure 5. Waveforms 7/15 VNQ860-E / VNQ860SP-E PowerSO-10TM Thermal Data Figure 6. PowerSO-10TM PC Board Figure 7. RthJA Vs. PBC copper area in open box free air condition 8/15 VNQ860-E / VNQ860SP-E Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/15 VNQ860-E / VNQ860SP-E Table 10. PowerSO-10TM Mechanical Data Figure 8. PowerSO-10TM Package Dimensions 10/15 VNQ860-E / VNQ860SP-E Figure 9. PowerSO-10TM Suggested Pad and Tube Shipment (No Suffix) Figure 10. Tape and Reel Shipment (Suffix "TR") 11/15 VNQ860-E / VNQ860SP-E Table 11. SO-20 Mechanical Data 12/15 VNQ860-E / VNQ860SP-E Figure 11. SO-20 Tube Shipment ( no suffix ) Figure 12. Tape and Reel Shipment ( suffix "13TR") 13/15 VNQ860-E / VNQ860SP-E Table 12. Date 14-Jul-2005 7-Nov-2005 Revision History Revision 1 2 Updates , New template. Few Updates. Description of Change 14/15 VNQ860-E / VNQ860SP-E Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15 |
Price & Availability of VNQ860-E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |